Hello Experts,
I am configuring the Sender EDISeparator adapter wher I am getting the following error.
Error : No ruleset for CONTRL/3 available
Following are the Control Key scenario associations :
( I reimported the B2B files but the "CONTRL" is not added in the "Control Key Name" column. )
Hi guys,
is there a need to install the PGP add-on in a case where a decentralizedAAE is needed and is located on a different host (DMZ)?
is this component an adapter related one or IS related.
Appreciate your insights.
Hi all,
we are currently evaluating the B2B-Add-on. I have tigged to receive delivery report from X.400 VAN provider and I also receive them. The polling X.400 sender channel is searching for following Sender Agreement:
So far so good. I am receiving a message into the pipeline containing following payload:
If I look to the Main Tab, I also see a good reference to the originally sent outbound message (where the X.400 delivery report is the answer to).
I have already looked into following topics, but not really get further:
http://scn.sap.com/docs/DOC-39575
http://scn.sap.com/docs/DOC-16003
I of course can create some ABAP or JAVA mapping to create a mapping to ALEAUD, but I would assume their must be something out-of-the-box at SAP PI to handle those acknowledgements automatically.
Have I missed any how-tos on that or can someone give me some good hints how to continue?
Thanks and merry x-mas to all of you!
Regards Helmut
Hi Experts,
Scenario: Ansi X12 file to SAP Orders IDoc.
I have followed the link http://scn.sap.com/community/b2b-integration/blog/2012/09/27/b2b-edi-inbound-step-by-step-configuration
B2B- EDI Inbound -Step by Step Configurationto construct the interface.
ANSI X12 850
Flow1: EDI_Sender(CC_File_Sndr)---->EDISeprater(CC_EDISeparator_X12-850_Rcvr)
Flow2: EDISeprater(CC_EDISeparator_X12-850_Sndr)--->IDoc_AAE (CC_IDoc_AAE_rcvr)
I am able to see the file sender channel picks the file and successfully send to EDI Separator.
The EDI Separator while converting throwing *** error:
Error: com.sap.aii.converter.x12.x122xml.X122XMLException: Error occurred at X12 document character 175: Cannot find conversion rules for 850/004010
Do we need to add anything in the B2B tables?
The interface is developing first time in the PI 7.31 box.
The screen shot from B2B Integration cockpit is attached.
Currently the table fields are empty and would like to know how the fields are added in the B2B tables.
Thanks!
Praveen.
Hi All,
I am developing below screnario
IDOC--PI--AS2(7.31)
while testing I am getting below error.
0}: The module-paramteter "eancom.subversion.prefix" is not set. Using default value "false"
0}: The module-paramteter "eancom..audit" is not set. Using default value "false"
MP: exception caught with cause com.sap.aii.af.lib.mp.module.ModuleException: Can not find Segment Elements for messageVersion 96A, message subversion EAN007, message agency UN, segment S_CPS, newFirstlevelElement D_7164, currentIndexLevel1 0
Exception caught by adapter framework: Can not find Segment Elements for messageVersion 96A, message subversion EAN007, message agency UN, segment S_CPS, newFirstlevelElement D_7164, currentIndexLevel1 0
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.lib.mp.module.ModuleException: Can not find Segment Elements for messageVersion 96A, message subversion EAN007, message agency UN, segment S_CPS, newFirstlevelElement D_7164, currentIndexLevel1 0
Thanks
Prem
After reading the blogs and helpful threads, I have run AS2 demo successfully with mendelson 
.
But I still have problem to receice AS2 from WalMart.
find error in b2bic log:
AS2_VERSION: 1.1; MESSAGE_ID: <20141226041451A0B7256E@146907777000001>; AS2_TO: CC_AS2_SENDER_WALMART; AS2_FROM: 146907777000001; FROM: GVBe2Bzy; SUBJECT: EDIINTDATA; CONTENT_TYPE: application/pkcs7-mime; smime-type=enveloped-data; name="smime.p7m"; CONTENT_LENGTH:1351 |
Cannot decrypt message |
Error occured while decrypting the AS2-message: Cannot decrypt message: org.bouncycastle.cms.CMSException: key invalid in message. |
I did some search, somy says it is JCE problem?
but my demo scenario use 1024bits, it works fine.
or algorithm 3DES to DES, PI does not support 3DES？ I use DES in my demo too.
Hello Experts,
I see options to edit messages for ANSI X12 and EDIFACT standards.
But, I don't see an option to Edit and Create Custom messages or versions for TRADACOMS.
Is it not possible to create custom messages/versions for TRADACOMS
Thanks.
Regards,
Sudharshan N A
Dear All..
Can anyone help me out in importing TPM related UDF's in IR,so that I can use in Graphical Mapping.
Regards,
Tibin Joseph
Hi ,
My scenario is File to SFTP. I have to copy the same file name from source to target.Its a ESR bypass scenario
I know how to do it in FILE to FILE scenario. But incase of SFTP i dont know how it works.
Surprisingly, i could not find any help document for SFTP adapter on Help.sap.com . I have wasted 3 hrs searching for help document but it was of no help. I hve seen almost all the blogs on SFTP adapter but nothing was of help
Can someone tell me where can i find SAP Help docs for SFTP adapter?
Hello eveyone,
I am new to PO so please forgive my basic question. The requirement in the EDI 850 on the transaction trailer SE01 to place the count of the number of ST through SE segments. When I looked at the B2B sample there was a constant $B2B_SEG_COUNTER mapped. Mr. Google did not get any hits when I looked for B2B_SEG_COUNTER.
Is there any documentation on B2B_SEG_COUNTER counter. How is this constant changed from what looks like a variable to the actual number? At this time I've only completed my mapping so I have not gotten into the details in the intergration builder - maybe it will make more sense as I work in there. Any guidance is appreciated.
Regards,
Diane Fuller
Hi guys,
is there a need to install the PGP add-on in a case where a decentralizedAAE is needed and is located on a different host (DMZ)?
is this component an adapter related one or IS related.
Appreciate your insights.
Dear Experts,
We are in the process of migrating our Gentran EDI Interfaces to SAP PI. We have been using Seeburger AS2 adapter for an external non-EDI connection. But, to migrate all the EDI interfaces full fledge, which is the better choice - Seeburger (we still need to buy BIC module) or Crossgate or B2B Addons? We would like to implement/maintain these interfaces internally and not outsource it to SAP totally. So, please suggest the best option with the proper justification.
Thanks in advance.
Hello Folks,
after updating from B2B Addon SP3 to B2B Addon SP4 we face this odd error within the EDI Separator receiver channel. The channel settings are completely default - no check boxes checked, no acknowledgements in place. Before the update the scenarios were all fine.
The scenarios look like this:
FILE/OFTP -> EDI Separator
EDI Separator -> customer/vendor specific scenario -> ERP
However this error occurs only for EDIFACT messages. VDA messages run fine. In our B2B version we do not have EANCOM entries in place - we just use edifact and VDA messages.
These are the entries within the message log:
| Information | Message entered AF MP exit bean and will now be passed to the JCA adapter |
| Error | MP: exception caught with cause java.lang.NullPointerException: while trying to invoke the method java.lang.String.equalsIgnoreCase(java.lang.String) of a null object loaded from local variable 'cDescr' |
| Error | Message could not be forwarded to the JCA adapter. Reason: while trying to invoke the method java.lang.String.equalsIgnoreCase(java.lang.String) of a null object loaded from local variable 'cDescr' |
| Error | Exception caught by adapter framework: while trying to invoke the method java.lang.String.equalsIgnoreCase(java.lang.String) of a null object loaded from local variable 'cDescr' |
| Error | Delivery of the message to the application using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException: while trying to invoke the method java.lang.String.equalsIgnoreCase(java.lang.String) of a null object loaded from local variable 'cDescr' |
The system settings are:
VM Name: SAP Java Server VM
VM Vendor: SAP AG
VM Java Version: 1.6.0_65
VM Runtime Version: 6.1.059 24.45-b11
Kernel Version: 7.40.3301.363358.20140408103655
What I have done so far:
-checked if the correct adapter meta data (SP4) is in place
-checked if the correct SP4 sca files are deployed
-deleted b2b table entries and reuploaded them again
Any ideas how to fix this error? What needs to be checked also?
Thank you in advance.
Hi Experts,
Scenario: Ansi X12 file to SAP Orders IDoc.
I have followed the link http://scn.sap.com/community/b2b-integration/blog/2012/09/27/b2b-edi-inbound-step-by-step-configuration
B2B- EDI Inbound -Step by Step Configurationto construct the interface.
ANSI X12 850
Flow1: EDI_Sender(CC_File_Sndr)---->EDISeprater(CC_EDISeparator_X12-850_Rcvr)
Flow2: EDISeprater(CC_EDISeparator_X12-850_Sndr)--->IDoc_AAE (CC_IDoc_AAE_rcvr)
I am able to see the file sender channel picks the file and successfully send to EDI Separator.
The EDI Separator while converting throwing *** error:
Error: com.sap.aii.converter.x12.x122xml.X122XMLException: Error occurred at X12 document character 175: Cannot find conversion rules for 850/004010
Do we need to add anything in the B2B tables?
The interface is developing first time in the PI 7.31 box.
The screen shot from B2B Integration cockpit is attached.
Currently the table fields are empty and would like to know how the fields are added in the B2B tables.
Thanks!
Praveen.
Hello Experts,
I am configuring the Sender EDISeparator adapter wher I am getting the following error.
Error : No ruleset for CONTRL/3 available
Following are the Control Key scenario associations :
( I reimported the B2B files but the "CONTRL" is not added in the "Control Key Name" column. )
Hi Experts,
We are testing SAP new SFTP adapter with SAP-PI7.3.
We figured out below 2 functionality missing in new SFTP adapter. Can you please guide do we have any alternative to achieve both or is SAP has any plans to add both functionality in future SFTP adapter releases.
Question Point 1: New SFTP adapter is not having option “Advanced Selection for Source File”, like it is there in File Adapter. So we cannot select multiple folders on same SFTP server with one SFTP adapter service, i.e. we have to implement SFTP adapter to poll each folder on same server.
Question Point 2: SAP-SFTP adapter does not support to poll folders with "\", it supports only "/".
Because during testing we figure out, by default SFTP sender adapter put “/” in front of any folder path given in “Directory” field of adapter.
Below is the screen short for reference.
For Q1)
New SFTP adapter:
File Adapter:
For Q2)
Regards
Hi All,
We are upgrading Business Connector 4.7 to 4.8 version. We are facing one challenge now. The Database Adapter is not visible in the Admin Screen.
Can some one has any idea on this?
Any help would be much appreciated.
Thank you.
Regards,
Anuj Dulta
Dear Experts,
We are in the process of migrating our Gentran EDI Interfaces to SAP PI. We have been using Seeburger AS2 adapter for an external non-EDI connection. But, to migrate all the EDI interfaces full fledge, which is the better choice - Seeburger (we still need to buy BIC module) or Crossgate or B2B Addons? We would like to implement/maintain these interfaces internally and not outsource it to SAP totally. So, please suggest the best option with the proper justification.
Thanks in advance.
Hello eveyone,
I am new to PO so please forgive my basic question. The requirement in the EDI 850 on the transaction trailer SE01 to place the count of the number of ST through SE segments. When I looked at the B2B sample there was a constant $B2B_SEG_COUNTER mapped. Mr. Google did not get any hits when I looked for B2B_SEG_COUNTER.
Is there any documentation on B2B_SEG_COUNTER counter. How is this constant changed from what looks like a variable to the actual number? At this time I've only completed my mapping so I have not gotten into the details in the intergration builder - maybe it will make more sense as I work in there. Any guidance is appreciated.
Regards,
Diane Fuller
Hi All,
If we enable TPM configuration by selecting the check box "Read from Dynamic Headers" in EDI Separator Receiver ,It is used for Acknowledgements if we enable the same in TPM through B2B Cockpit.I understood this process.But I need clarification on EDI Separator Sender.If we have maintained TPM configuration for the partners.Is it required to provide Sender ID,Receiver ID,Sender ID Qualifier,Receiver ID Qualifier separately or is there any possibility to directly taking it from TPM by providing TPMContentAccessModule in channel. Please clarify on it as it is helpful for me proceed further.
Thanks.
Tibin