Hi Experts,
I have scenario in which I am getting two fields from the source system. I have to create a File Name from those fields and Pick the same File Name from a External SFTP Server located on the target and send it back to the source system. I am able to create the File Name from the source data but my challenge is to place that File Name into the Sender SFTP adapter.
Please let me know how can I achieve this functionality? Is there a workaround to this problem?
Thanks in advance,
Arkesh
I need to convert SWIFT format to XML using B2B Add on . Can any one help me if there is any Std Module available in B2B Add-on for this conversion .
Hi
When i am trying to convert an EDIFACT file into corresponding XML file. I am getting "xml:java.util.regex.patternsyntaxexception dangling meta character '*' near index 0 ". What could be the possible reason for this error. How could be it resolved?
i am using B2B EDI to EDI-XMl test tool for converting an edi file to corresponding xml.
The test converter using for it :
http://<hostname>:<port>/webdynpro/dispatcher/sap.com/converter~maintain~maintenance-app/Maintenance
Regards,
Rahul
Dear All,
I have deleted the custom control key from control key scenario association and is still reflecting in Control key description.
How can I delete the same from Control key desc. also.I think the deletion should happen automatically on deletion from control key scenario association table,but its not happening.
Regards,
Tibin
Dear All,
We are facing the error while enabling Acknowledgment 997 in EDI separator Receiver on ANSI X12 to XML conversion .But if Acknowledgement is not enabled the error is not occurring and EDI ANSI X12 is successfully converting to XML also.
We configured all channels for 850 and 997 EDI Separator Sender and File Receivers.
In cockpit ,Conversion everything is working on SAP control key.
NOTE : We are facing the error only on enabling Ack. 997.
Please find the Screen shots :-
Regards,
Tibin Joseph
Hi ,
My scenario is File to SFTP. I have to copy the same file name from source to target.Its a ESR bypass scenario
I know how to do it in FILE to FILE scenario. But incase of SFTP i dont know how it works.
Surprisingly, i could not find any help document for SFTP adapter on Help.sap.com . I have wasted 3 hrs searching for help document but it was of no help. I hve seen almost all the blogs on SFTP adapter but nothing was of help
Can someone tell me where can i find SAP Help docs for SFTP adapter?
Hi Everyone,
We are planning to migrate dual stack PI7.30 to SAP PO7.4 and below are the options which we are planning for:
Option 1 :
--->Migrating classical interfaces into ICO using migration tool
--->Splitting Java stack from ABAP stack using the Dual stack split functionality from SAP.
--->After step 2 i believe we have only AEX which will not support BRM and BPM and it can't be a Process Orchestration Package.I have a plan to upgrade AEX to SAP PO.Since AEX will be on separate instance.(I doubt upgrade can be done or not.)
--->After successful migration we have a plan to decommission the ABAP stack.Can we do this?If i choose this option can i save some bucks to my client?
Option 2:
--->Brand new SAP PO 7.4 box
--->Migrating from PI730 dual stack to SAP PO using migration tool
I already tried with option 2 in sandbox and i have migrated few interfaces and it really went well.
I wanted to go for the best option in terms of hardware and software license and cost.We don't have more no of interface so migrating is not a constraint in both cases.We don't have any ccBPM interfaces
--->SLD content in option 1 is not a problem however in option 2 do i need go for SLD synchronization to import content(Product, SWCV,TS and BS) from dual stack to new SAP PO7.4
Please suggest the best option.
Cheers
Pavan
Dears,
kindly i need to know how will my material master data will be on ariba network in order to communicate with my vendors , and one other thing
how will my vendors be registered on ariba network
Dear Experts,
We've followed the blog http://wiki.sdn.sap.com/wiki/display/XI/Generating+SSH+Keys+for+SFTP+Adapters+-+Type+2 to generate the SFTP keys for PI server. We've successfully generated the SFTP Public and Private keys for our SFTP Sender Adapter and could refer the Private Key View SFTP_TEST and the associated private key sftp_key in the SFTP sender adapter. Private Key is also uploaded at /usr/sap/P1D/SYS/global/SFTPKeys (Notsure if this is really required as the keys are already mentioned in NWA key store)... and we've shared our public key to our SFTP vendor to upload it on the SFTP server (uploaded successfully there as well)
But, when I activate the sender SFTP communication channel, its failing with the error 'Exception Received: com.jcraft.jschException: Auth cancel'
Is this due to the key upload path issue - bcoz Keys are not matching? Is there any other bean or param I need to mention in the sender SFTP channel? Please guide.
Thanks
Hi ,
My scenario is File to SFTP. I have to copy the same file name from source to target.Its a ESR bypass scenario
I know how to do it in FILE to FILE scenario. But incase of SFTP i dont know how it works.
Surprisingly, i could not find any help document for SFTP adapter on Help.sap.com . I have wasted 3 hrs searching for help document but it was of no help. I hve seen almost all the blogs on SFTP adapter but nothing was of help
Can someone tell me where can i find SAP Help docs for SFTP adapter?
I need to convert SWIFT format to XML using B2B Add on . Can any one help me if there is any Std Module available in B2B Add-on for this conversion .
Dear Experts,
I'm preparing an integration strategy for a client of mine and one of the important areas of consideration is EDI integration. I would like to know if you can me provide me any links which could give a comparison on TCO with rough estimates for both in-house EDI and going via a hosted partner for a medium to big enterprise. I believe SAP has invested quite a bit on the B2B add-on and is still working to add more features to it but I believe at the current point of time the scales are more tilted towards the hosted providers as we are yet to fully emerge from the approach.
The client already has license for a SAP PO environment in the landscape and a license consolidation of B2B add-on and PO does prove to be beneficial. However, there is always the argument in favor of hosted EDI providers that they are the core experts in this field and do this for a living. At the same time, we would need a slightly uplifted skill of a PI consultant who has hands on knowledge on B2B addon to work and support this in future.
Hence if I could get some material to prepare a comparison between the two approaches, then my client can use it as a reference.
Since this is a fresh implementation project, I have suggested the use of B2B addons as it would deliver a single vendor solution going forward with higher flexibility. But I think, I should carefully weigh all the pros and cons.
Regards
Varun
Hi ,
I am working on EDI ( 944 ANSI X12 ) to IDOC scenario and i am using B2B add on to split the message.
Here, getting below error in EDI separator sender channel when i am sending EDI file through this channel.
"com.sap.aii.af.lib.mp.module.ModuleException: senderChannel : Catching exception calling messaging system. Will deliver negative 997 if requested"
I am able generate 997 acknowledgement with same input payload ( EDI 944) file. But i facing this error when converting EDI to XML.
Please see EDI sender channel error below.
Module configuration.
Please help on this.
Regards,
Trinadh
Hi,
for inbound EDI processing in GenericConverterModule one can set edi.copy (edifact.copy, eancom.copy..) parameter to get a copy of the original EDI message in the message payload aside from the XML representation.
However I tried this on an outbound conversion of XML EANCOM to EANCOM but without success.
Although in message log it shows the parameter saying:
B2B EDIFACTConverterModule: Property: eancom.copy value is set as: true. Read from Channel
B2B EDIFACTConverterModule: copied main document
I can't find a copy of the EDIFACT data that is then sent out through the communication channel.
Any ideas are highly appreciated
Kind regards
Markus
Hi All,
My requirement is to access all objects (For Ex. external definitions with XSD) of one Software Component in another ,ie 2nd Software component.
I have created a 1st Software component to place all the external definitions .Now how can I access those object in the 2nd Software component from 1st Software component.
I have maintained dependency in SLD. saying 1st Software component is the prerequisite of 2nd Software component.But I am unable to access those objects while creating Service interfaces ( inbound / outbound) choosing external message .
1.Will it possible to do through dependency of software components in SLD?
2.Under which context the dependency to be maintained?
Requires valuable information..
Thanks in advance.
Tibin Joseph
Dear All,
We are facing the error while enabling Acknowledgment 997 in EDI separator Receiver on ANSI X12 to XML conversion .But if Acknowledgement is not enabled the error is not occurring and EDI ANSI X12 is successfully converting to XML also.
We configured all channels for 850 and 997 EDI Separator Sender and File Receivers.
In cockpit ,Conversion everything is working on SAP control key.
NOTE : We are facing the error only on enabling Ack. 997.
Please find the Screen shots :-
Regards,
Tibin Joseph
Hi Experts,
We are testing SAP new SFTP adapter with SAP-PI7.3.
We figured out below 2 functionality missing in new SFTP adapter. Can you please guide do we have any alternative to achieve both or is SAP has any plans to add both functionality in future SFTP adapter releases.
Question Point 1: New SFTP adapter is not having option “Advanced Selection for Source File”, like it is there in File Adapter. So we cannot select multiple folders on same SFTP server with one SFTP adapter service, i.e. we have to implement SFTP adapter to poll each folder on same server.
Question Point 2: SAP-SFTP adapter does not support to poll folders with "\", it supports only "/".
Because during testing we figure out, by default SFTP sender adapter put “/” in front of any folder path given in “Directory” field of adapter.
Below is the screen short for reference.
For Q1)
New SFTP adapter:
File Adapter:
For Q2)
Regards
Hi,
I created a Number Range Object in the B2B Integration Cockpit named "/B2B/TransactionSetIDCode" and assigned it to a variable for mapping to the X12 ST02 element. The variable is named "$B2B_UEBNR_BEFORETransactionSetIDCode$B2B_END_UEBNR".
During mapping, the value identified by the Number Range Object is mapped to ST02. However, when I execute the mapping once again, the NRO value is not incremented. From my understanding, the NRO value should be incremented.
I do have the Module configured "localejbs/TransmissionNumberModule" and "multipleNumbersPerMessage" = true.
Any suggestions?
Thanks,
Dave
Hi Experts,
We have configured AS2 from SAP B2B Add-on as part of our SAP PI 7.31 Dual Stack installation. I was able to successfully send AS2 messages to the partner by configuring the appropriate Receiver Channel.
We have a CA Signed certificate which is uploaded in a KeyStore View in NWA. The partner's public certificates are also uploaded on NWA TrustedCA Keystore and also the KeyStore where we store AS2 certificates (some partners use the same certificate, others have different certificates for SSL Handshake and Data Encryption/Signature Authentication).
However, after configuring the appropriate Sender Channel and the associated Configuration Scenario objects, when the partner sends data to us, they are receiving a 401 Unauthorized Error. I have instructed them to send the data to https://server:443/AS2/B2B. I have sent them our public certificate and everything is still failing on their end.
Any help will be appreciated.
Best Regards,
Rommel
Dear Experts,
We are in the process of migrating our Gentran EDI Interfaces to SAP PI. We have been using Seeburger AS2 adapter for an external non-EDI connection. But, to migrate all the EDI interfaces full fledge, which is the better choice - Seeburger (we still need to buy BIC module) or Crossgate or B2B Addons? We would like to implement/maintain these interfaces internally and not outsource it to SAP totally. So, please suggest the best option with the proper justification.
Thanks in advance.